Andons/Timers/Counters
LED Timer/Counter – Decode Solutions PN 9001/ PN 9002
LED Counters are operated from user output that the user wires to the counter’s logic inputs. These inputs are activated by the application of a voltage. These inputs are often applied by running power through a simple device such as a palm switch or photo-eye. The input activates when the voltage is applied and will not activate again until the voltage is removed and then reapplied.
A relay output is provided for usage with a Common, Normally Open, and Normally Closed output for customer to wire any 120 VAC 3 Amp resistive load (or lower). This Relay output is actuated by the Counter when it reaches EITHER Zero or Preset values (jumper selectable). This is commonly used to actuate status indicators for personnel to change operations, change shifts, etc.
Please Note: Wiring is required for this products use. 120VAC power must be run along with 120VAC OR 24VDC inputs to utilize Counter characteristics. Two holes in cabinet are provided for power and inputs. The enclosure includes Wall mount mounting tabs.
Main Power: 120VAC / 60Hz
Input level: 24 VAC/DC or 120VAC
Digits: Uses 7-segment LED configuration
Std Color: High Efficiency Red
LED Life: 100,000 Hours (~11.4 years) typical
Configurations: 2600 Series displays are configurable as Counters or Timers, jumper selectable
Unit Dimensions: 14.25″ wide by 6.75″ tall by 3″ deep
This Run/Hold Reset Kit includes 15 foot cabling with a non-terminated end for use with any unit requiring actuation of inputs to Hold or Reset the display.
*****
We integrate to a variety of systems including cameras, LED Signage, conveyors, RFID, industrial tooling, PLCs, and data bases to help businesses lean their processes and extract specific data from automated reports. We also sell various hardware including cameras, barcode scanners and printers, 2-way business radios, andon (messaging systems), stacklights, and LED signage (timers, counters & message boards.)
